Entrepreneur, Author, Designer, DIY Expert


Posts tagged leather
DIY Leather Napkin Rings from A Well-Crafted Home

I never had any use for a napkin ring and most of the ones that I see in stores and in traditional place settings have not inspired me to change my thinking. As I was playing with leather cuts and remnants from another project in the book, I started forming rings with notched wings. Instantly I fell in love with the idea of how this type of ring would age with time and use. The added layer of unpolished sophistication these leather napkin rings possess is a thoughtful addition to a modern or rustic table. 

diy leather napkin rings


Tools & Materials:

Tip: Tooling leather works great for this project. Either buy pre-cut strips or cut your own by hand. 


a well-crafted home janet crowther


  1. Put one 5-1/2 inch strip of leather, right (smooth) side up, on the cutting mat. Line it up horizontally and straight to any line guide on the cutting mat.
  2. Shape the ends of the leather, using the point strap end punch. Place the punch concave side facing the length of the leather, with the center of the convex side lined up at the center edge of the leather. Try to keep the punch as parallel to the leather as possible. The 2 ends of the punch should be flush with the edges of the leather. Punch the edge of the leather with the help of a mallet. You may have to hit the punch several times to get it to go all the way through. 
  3. Repeat with the opposite end of the leather. Once both sides are punched, the leather will look like a very long and straight-sided oval.
  4. Measure a 1/2 inch in from each end of the leather and add a small pencil mark. Center the round hole punch over one of the pencil marks. Punch out the mark with the help of a mallet. Repeat on the other end of the strip, punching out the second pencil mark.
  5. Time to cut the interlocking openings. The thinner your leather, the thinner this cutout will need to be. You want a tight groove so that the leather stays interlocked during use. Start on the right side, lining up the craft knife perpendicular to the length of the strip. At the inner left edge of the round hole you just made, cut a straight line all the way down the bottom of the strip. Next, move the knife over to the inner right of the hole and cut another line straight down. Remove the line of leather you just cut out.
  6. Turn the leather strip 180 degrees so that the cut you just made faces up and away from you. Line up the craft knife perpendicular to the length of the strip, at the center left edge of the round hole on the right side. Cut a straight line all the way down to the bottom of the strip. Next, move the knife over to the right edge of the hole and cut another line straight down. Remove the line of leather you just cut. 
  7. Pick up the leather strip and flip it over to the back. Turn the 2 ends in toward one another, twisting and interlocking the leather ends. If the cuts are too tight, you can keep slicing off a very small amount on 1 side, but don't do too much at once or you'll end up with a loose connection. You can coax the leather into a round shape; with use it will happen naturally over time. Repeat all the steps to make 3 additional napkin rings.

janet crowther a well-crafted home book

I loved styling this dining room scene for the book - the dyed linen tablecloth, cotton napkins, and leather napkin rings are so beautiful together. You can find the tutorials for the Heirloom Linen Tablecloth and Indigo Striped Napkins, shone above, in A Well-Crafted Home


All photos by Julia Wade Photography

DIY Marbled Leather Coasters

There are a couple DIYs that I come back to year after year. This is one of those projects. I use these coasters almost everyday in my home. I have a marbled blue version sitting right here on my desk, a marbled rust version by my bed, and some pink ones in my living room. Luxe leather with a beautiful organic printed pattern and you really can't go wrong. This project makes a great handmade gift, make a set of 4 coaters to give away for various holidays and celebrations. If you aren't excited about cutting your own coasters you're in luck, they can be purchased pre-punched!


Tools & Materials:




  1. Set the circle cutter up to cut a 3.5-inch circle. Put the leather hide smooth side down on the cutting mat (cutting the leather right side down will prevent a hole appearing at the top of your coaster from the cutting tool). Cut 4 coasters from your leather hide.
  2. Fill the baking pan with about 1-2 inches of water. 
  3. Put on paint brush in the ink and let the ink soak into the brush. Touch the brush to the water surface and let the ink spread, pick up the brush. Take the second paint brush and dip it into the oil. Touch the oil brush at the center of the ink circle and watch the oil spread the ink away. Alternate between the ink and the oil to create patterns in the water. 
  4. You can use a toothpick to swirl the patterns around. I like to flick a little oil over the water to create "blank" circles in my marbled pattern.
  5. Once you see a pattern you like and it's wider than the coaster, take the coaster smooth (right side) down in your hand. Just grazing the surface, dip the coaster into the water. Be sure that the whole surface has touched the ink. Pick it up and lay it flat to dry, pattern side up. If you still have enough pattern floating on the surface you can dip the next coaster, otherwise use the ink and oil to create a new pattern. Repeat for the remaining coasters.
  6. Let the coasters dry fully before using, about 2 hours.



You GOt options:

I love this technique, did I say that already? Use the circle cutter to make larger circles and make trivets! The larger circles below are about 8-10 inches. For the trivets with marbling in the center I cut out a larger circle and then cut a smaller circle from the larger so they could nestle together. After marbling the center circle take a piece of sheet cork and glue all three pieces together. You can tell that these have gotten some heavy use but I wanted you to see an alternative option with all your new tools. Have fun!